SensorProbe2+ untuk monitoring HEAT MAP di Rak Server


AKCP memperkenalkan produk unggulan baru, yaitu SensorProbe2+. SP2 sebelumnya merupakan produk yang banyak digunakan dalam banyak pekerjaan dan site, karena kemudahan dan ukurannya yang kompak. 
Sekarang ini, diperkenalkan solusi baru dari SP2+ yang dapat digunakan untuk monitoring 1 kabinet Rak. SP2+ dapat digunakan untuk memonitor tiap rak, dan nantinya terhubung ke pusat dengan menggunakan AKCess Pro Server.
  • IP based, including SNMPv3, HTTPS, VPN
  • Send encrypted SNMP Trap and Email Notifications
  • Supports 4 Intelligent Sensors or up to 20 Dry Contacts
  • Optional cellular modem with external antenna
  • Notification Wizards
  • Front and Rear Thermal Mapping for any server cabinet
  • Low Cost Daisy Chained Temperature sensors
  • Optional Expansion Module connectivity
  • Virtual Sensors

Thermal Map Sensors (sold separately)

Front and rear thermal mapping for any server cabinet.
  • Diagnose server room hot spots.
  • Save cooling costs with precision rack monitoring
  • Lower energy use within server cabinets
High inlet air temperature indicating hot spots in the server room.
Thermal Map showing a critical alert status on the exit air temperature.

Environmental Monitoring (sensors sold separately)

  • Monitor temperature,
  • humidity,
  • air flow,
  • dry contacts,
  • smoke detectors,
  • water detectors,
  • AC voltage detectors and more…
Server Cabinet Monitoring - Sensors, Access Control, Power and Water Leak

AKCess Pro Server (free with the purchase of SP2+)

  • Manage cabinet maps, sensors, access control and other equipment from anywhere in the world.
  • Monitor data center maps and drill down to single cabinets.
  • Automate notifications based on sensor, power or access control sensors status.
  • Notification Wizards : SNMP traps, Email, Popup Messages, SMS, Remote Unlock (and more…)
  • Use custom scripts for complex sensor input or notification outputs.

Technical Specifications

Sensor Ports4 RJ-45 Sensor Ports for connecting AKCP Autosense SensorsUp to 20 Dry Contact Input and Output (0VDC/5VDC)
Mounting0U rack-mountable
Compatible with AKCP’s DIN Rail Clips
Status IndicationLED indication for power
LED for network connectivity
LED for sensor online and threshold status
ComponentsManufactured using highly integrated, low power, surface mount technology to ensure long term reliability.
MTBF1,400,000 Hours
ConnectivityOptional Internal Cellular Modem (EU / US frequencies available). Includes External Antenna
Optional Expansion CapabilitiesExpansion port uses 1 sensor portConnect up to 4 Cabinet Control Units
DimensionsSize : 4.5″ x 2.5″ x 1.25″
Weight : 0.3 Kg
Power RequirementsVoltage : 12 VDC, 1AmpVoltage : 12 VDC, 2Amp (Including Optional Modem)
Operating EnvironmentTemperature: Min. -35° C – Max.80° CHumidity: Min. 20% – Max. 80% (Non-Condensing)