The licensing options are based on the number of sensors. Each of the following items counts as one sensor:
- Monitoring traffic/bandwidth on one port of any device via SNMP (e.g. switch, firewall, server) using the MIB2 standard
- Monitoring errors/min, unicast packets/s, non-unicast packets/s on one port of a device via SNMP using the MIB2 standard
- Monitoring one other system parameter via SNMP (e.g. CPU, diskspace etc.) that is accessible via one OID value
- Monitoring traffic going through one local network card (NIC) via Packet Sniffing. If you use filtering then each set of filters counts as one sensor.
- Monitoring of one stream of data traffic via xFlow (NetFlow, sFlow) Monitoring. If you use filtering then each filterset counts as one sensor.
The number of actual hardware devices is not taken into account at all, only the number of sensors. For the "unlimited licenses" the number of sensors that can be monitored is not programmatically limited by the software itself, but may be limited by your software, hardware and network.
Apa saja yang tersedia ?
Licenses of PRTG differ by two parameters:
- The maximum number of sensors.
- The number of allowed core server installations.
| PRTG License | Sensors | Number of core server installations |
|---|---|---|
| PRTG 100 | 100 | 1 (plus 1 for Failover Node in Cluster) |
| PRTG 500 | 500 | 1 (plus 1 for Failover Node in Cluster) |
| PRTG 1000 | 1,000 | 1 (plus 1 for Failover Node in Cluster) |
| PRTG 2500 | 2,500 | 1 (plus 1 for Failover Node in Cluster) |
| PRTG Unlimited | unlimited | 1 (plus 1 for Failover Node in Cluster) |
| PRTG Corporate | unlimited | multiple within one corporation * |
* The Corporate License allows multiple installations of the core server in different
sites of one corporation in one country.
sites of one corporation in one country.
